Description
The AromOzone AZ108 is a singular electrode cold cathode Ozone generator ideal for a 8″ ducting system.
The electrodes runs at a consistent temperature of 20.1 degrees C and the transformer at 20.8 degrees
The AromOzone AZ-108
The AromOzone AZ-108 is intended to fit inline in to your ducting system and although it is designed to fit a 8″ fan only, it is possible to duct up from a 4, 5 or 6″ fan to fit, however we would strongly advise any customer from ducting down on this model, instead they should buy the appropriate Aromozone system.
The Aromozone inline solution must only be operated when the fan is switched on and needs a minimum of 10 meters of ducting before expelling outside of the environment to allow ozone to breakdown, this can be coiled round, it needs this to allow enough time for the ozone to bind.
We would advise always to run these systems on half power to establish needs then if only required, turn to full power if odors or mould is increased.
Eliminates odor, mould, bacteria, smoke as well as other pathogens.
Aromozone AZ108 8″ 1 cell Ozone Generator, Inline Ozone sterilization devices to remove mould, bacteria and odour, have been in use for a number of years. However, the majority are unable to consistently operate within a horticultural environment
It works well, recommend this.
Excellent
Friendly staff when I visited the shop so bought this online
Good value
This vent kit had all I needed for installation